Changing Mac Addresses In Haxorware

This is a guide to changing Mac addresses in Haxorware

Step 1 (Accessing Haxorware)

Open internet explorer or your preferred browser and in the address bar simply type the address “192.168.100.1” and hit enter!

The following page should appear

Step 2 (Addresses)

Now to change the mac address of your modem simply click on the addresses tab on the left hand side of the page.

If a Username &Password is Required Please input “admin” “admin”

The following page will appear!

Step 3 (Changing The Mac)

Simpley insert a mac address on the “HFC MAC” address box and change the serial number to match the HFC MAC. As for the usb and ethernet MAC genrally i change them to the same as the HFC mac and change the last 2 digits to 11 (for USB) 22(for Ethernet) and click on the save and reboot button!

After pressing the save and reboot button you modem will restart and should work!

PLEASE NOTE

Your modem will only work Providing the baseline Privercy (BPI), Frequency are setup correctly for your area! and Mac addresses have obotained and choosen correctly if you have any issuses connecting after please follow one of my related blogs

Related Blogs

• Setting Up Haxorware Via Ethernet
• Setting Up Haxoware Via Serial
  
• Changing Your Frequesncy in Haxorware
• Changing Your Baseline Privercy (BPI)
• Upgrading Haxorware
• Scanning For Mac's
• Unsderstanding MAC's and UBR's